Signal SS650 Manuel d'instructions télécharger pdf (Page 7)

-5-

DIP Switch Settings

DIP

SWITCH

FUNCTION

UP (Off)

(default)

DOWN (On)

AUX Wire Polarity Positive switching Negative switching

Hands Free Cycler

mode

Hands Free Cycler

mode disabled

Hands Free Cycler

mode enabled

The SS650 and LCS652 have two optional settings

that can be selected during installation using the DIP

switches located on the back of the amplifier case:

• Auxiliary Input Polarity

• Hands Free Cycler Mode Enable

DIP Switch 1 - Auxiliary Input Polarity (AUX Function)

Applying a positive voltage to the green wire normally activates the

auxiliary function (Air Horn standard/Hands Free Cycler function optional).

If you want the AUX function to activate when the green wire is connected

to ground (negative), flip DIP switch #1 into the DOWN (On) position (as

pictured to the right).

DIP Switch 2 - Hands Free Cycler Mode Enable

This siren is shipped with the Hands Free Cycler mode DISABLED. To

enable Hands Free Cycler mode, set DIP switch #2 into the DOWN (On)

position (as shown to the right).

See page 7 for additional details on Hands Free Cycler mode.

DIP Switches

1 2 3 4 5 6 7 8 9 10 11 12

Pas de commentaire

Signal SS650 Manuel d'instructions Page 7