Signal NVR2716 Manuel d'utilisateur télécharger pdf (Page 22)

- 22 -

Pic 3.2.1.1 set the time section

【Interval】Only one alarm signal is turned on even there are several motion detect signals in the set

interval.

【Alarm output】Start the external equipment of corresponding linkage alarm when the motion detect

alarm is turned on.

【Delay】Delay a few moments and stop when the alarm state is turned off. The range is 10~300

seconds.

【Record channel】Choose the recording channel (multiple option supportive). Trigger the video

signal when the alarm is turned on.

Note:Set in the [Record Conf] and perform the linkage recording. Start detecting video files in the

corresponding time section.

【Tour】■ means that the selective channel is single window alternate patrol preview. The interval is

set in the [Main Menu]>[System] > [Tour].

【PTZ Activation】Set the PTZ activation when the alarm is turned on.

Note：to link PTZ, need go [Shortcut menu]->[PTZ control] to set preset point, tour & interval time

etc.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 50 51

Pas de commentaire

Signal NVR2716 Manuel d'utilisateur Page 22