Signal NVR2716 Manuel d'utilisateur télécharger pdf (Page 5)

- 5 -

press buttons 0~9 to input passwords and user IDs; during playback, press the following:

5) : Increase reverse playback speed 1X, 2X, 4X

6) : Press to freeze playback to one frame, then press again to advance frame-by-frame

7) : Press to start playback

8) : Press to slow playback speed by 1/2, 1/4, 1/8

9) : Press to increase forward playback speed 1X, 2X, 4X

10)MENU/ OK: Press to open/close the main menu.or confirm.

11)Navigation: Press the Navigation buttons to perform the following:

•: In menus, press to confirm selections; in PTZ mode, press to change the navigation buttons to

control the connected PTZ camera (not included)

• : Press to move cursor up; in PTZ mode, press to pan camera up

• : Press to move cursor down; in PTZ mode, press to pan camera down

• : Press to move cursor left; in PTZ mode, press to pan camera left

• : Press to move cursor right; in PTZ mode, press to pan camera right

12)USB: Connect a USB flash drive to the top port for data backup and firmware upgrades connect a

USB mouse to the bottom port.

1.3 Rear panel

The rear panel of T series

(1) Video Output (2) Audio Output (3) HDMI Output

(4) Network (5) VGA Output (6) RS-485, Alarm

Input/Output

(7) Power

2 Basic operation

Note: The button in gray display indicates nonsupport.and the picture is only for reference,please make the

object as the standard

1 2 3 4 5 6 7 8 9 10 ... 50 51

Pas de commentaire

Signal NVR2716 Manuel d'utilisateur Page 5